Motion-pro 08-0545 Bedienungsanleitung PDF herunterladen

STEERING HEAD BEARING RACE PULLER P/N 08-0545

1. Remove all parts necessary as per your OEM manual

to access your steering head bearings. For this job you

will need a 24 mm and a 12 mm wrench.

2. Insert the puller into the frame as shown in the picture.

Tighten the aluminum expansion nut to secure the puller

to the lip of the tapered bearing race. WARNING!!! Make

sure that the lip of the puller is engaged with the bearing!!!

on some frames it is easy to grab the lip of the bearing seat.

3. Install the puller cup, washer, and nut as shown in the

picture. Make sure that the cup is centered on the

frame and tighten the assembly.

4. Use the 12 mm wrench to keep the puller from rotating

while you tighten the nut with a 24 mm wrench. Repeat

this sequence until the bearing has been fully removed

from the frame.

INSTRUCTIONS

Process Black

White

White/Black MOTION PRO, INC. LOGO

Motion Pro, Inc.

867 American Street

Tel 650.594.9600 Fax 650.594.9610

www.motionpro.com

I08-0545 012015

For installing the new bearing we recommend the

Motion Pro Steering Head Race Driver (P/N 08-0550).

To remove and replace the bearing from the steering

stem we recommend the Motion Pro Steering Stem

Bearing Tool (P/N 08-0544).

P/N 08-0550

P/N 08-0554

INSTRUCTIONS 1

Inhaltsverzeichnis

Seite 1 - INSTRUCTIONS

STEERING HEAD BEARING RACE PULLER P/N 08-0545 1. Remove all parts necessary as per your OEM manual to access your steering head bearings. For this job

Kommentare zu diesen Handbüchern

Keine Kommentare

Motion-pro 08-0545 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Motorräder Motion-pro 08-0545 herunter. Motion Pro 08-0545 User Manual [fr] [de] [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Motorräder Motion-pro 08-0545